Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

11.06.2025 02:04

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

The MOV will conduct when the voltage exceeds 50% of line voltage.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

Why would an older small breed dog become obsessive about hygiene?

nine

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

One is “what exactly is in a ‘surge protector’ ? ”

Canadians went out of their way to help Americans stranded in Canada after 9.11.2001. Why did Canadians help so much the way they did? We read that Canadians don't particularly like Americans to begin with.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

So, the voltage could go up to 500 volts, and the fuse will not open up.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

Can you share a picture of your favorite outfit and explain why you love it?

2024–10–10[John johnson John Johnson ]

For this case there are devices called Metal oxide varistors (MOV).

He then describes the function of a fuse.

Snowflake to acquire database startup Crunchy Data - TechCrunch

[image of Common-mode choke]

This is where this question deviates from being a 'generic' question, and becomes more specific.

The bolt then partially travels down the line to your home.

Why wasn't Queen as successful in America as in other countries? Then, after Radio Ga Ga, they couldn't even get into the top 40 in America even when these songs were top 10 hits everywhere else in the world.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

Because the load is inductive, the current lags the voltage.(by a bit).

2024–10–14 [Omar Gharbi Omar Gharbi ]

CrowdStrike Swings to Loss as Expenses From Last Summer’s Outage Persist - WSJ

It also is a device that limits the change in current flow.

He then asserts :

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

Will friendly dogs protect their owners?

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

I post the exact comment here.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

Have you been with a stranger yet?

A fuse is a non-resetable over current circuit protector.

Here is a simplified AC power diagram.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

From an axiology/value theory point of view, how can one say that a diverse society is better than a uniform one, especially given the negative effects of diversity (racism, sectarian conflict, problems arising from extreme cultural relativism)?

Can the fuse protect the electronic devices from lightning instead of a surge protector.

But… the neutral is now “floating” because of the 1 ohm resistance.

This is 'the assistant's answer'

The Largest Black Hole Jet Ever Found Is 3 Times the Size of the Milky Way - The Daily Galaxy

but I think this circuit , shows a few more pieces.

2024–10–16 [ OO OLAOYE OYEBODE ]

Upvotes:

but this device (an Inductor) … impedes the rapid changes in the current.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

At least they know the answer if they wanted it.

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

At one ohm, the resistor has a maximum of 1 watt power.

There are three different concepts here that are getting confused.

First Sentence:

the problem then depends on "how fast does the fuse operate?".

eight

Edit 2024–10.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

so, what happens?

What is lightning?

But it can get overloaded, and no longer works.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

There are two important concepts here.

what exactly is a ‘surge’ protector?

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

He then describes Rainy Season and Lightning.

These are simplified answers to the original question, and does not change anything I wrote above.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

This is where the MOV conducts again, and dissipated the energy.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

This one hit behind the barn.

[old diagram got deleted by accident]

a photo is worth a thousand words.

One

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

(Dc diagram shown, AC is similar).

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

Now when you have a certain ac resistance, then a current flows in a loop.

These devices are installed between the “hot” and “neutral” and protective ground.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

An AC voltage/ current source, and an ac inductive load.

This device then solves the entire problem.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

In schematic diagrams this is the symbol for a fuse:

A circuit breaker is similar, but is resettable.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

The other is “what does a “fuse” do?”

It seems Mohan does not understand the difference between a comment and an Answer.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

The third is lightning and “how it gets conducted into a home.”

What does a fuse do?

Barnstars:

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.